How do I count values from a cell range in a cell range? For example I have 2 tables:
First Table:
Members
John A
John B
John C
[Code].....
I'd like to count the number of times John A, B and C appeared in the Who asked column. for this case, the sum should be 2.
I am trying to find out how many weeks our current inventory will support our sales. I am trying to research formulas that will do this, and coming back with things like OFFSET, MATCH, INDEX but am not certain the best way to put them together to get what I need. I use excel daily, but this is a bit mroe advanced than I am used to
Mini.xlsx
Starting in cell B4, I would like to count how many weeks of Demand can be covered by the specific Available On Hands in row 3 for that week, put the number of "Weeks Covered" into cell B2, and then fill over to the right in row 2. Right now, the values in row 2 are from my own manual calculations, but I would like a dynamic formula that will sum up the values in row 4 up to (but not greater than) the value in B3, give the count of cells that reached that sum (or even better with decimals to show the percentage covered), which I will copy over into B3:B13. Not sure if that makes sense, or if I can explain in a better way. The yellow cells are what I am trying to create a formula for and am currently stuck.
=COUNTIF($F419:$G486,G443)
In cell G443 I have the word "Jaxx"
I need it to count any cell in the range that has that word anywhere in the cell.
An example:
Practice Jaxx is in a cell.
If we can countif after the 9th character if the word practice is in the cell.
I'm trying to count number of rows with Data within a Range. i.e.
CatA = Range("A1:A15")
CatB = Range("A20:A35")
I want to know how many rows in range CatA have Data and how many rows in CatB have Data etc.
Count all zero(0) in the row except those that belong to column "Friday" :
Friday
17
18
19
20
21
22
Friday
24
25
26
27
28
29
[Code] ........
I am trying to count words in seperate rows,columns in a spreadsheet. I have tried to use the formula that was suggested in one of the formula pages but I did not get the correct answer. I tried to do just like the information said with a1:a5. I did get 5 as an answer but when I deleted one of the words it still said there were 5 words.
View 4 Replies View RelatedI would like to check if there's a way to count the number of unique value with a given condition
Eg. condition where parcel count <> 0, also want to find out the unique value of district and postal sector
Attached is the files, and my desired result is highlighted in RED.
I need to find to the occurrence/count of a cell value in a column/range.
Like say column A has following values
A12
A12
A12
A12
A13
A13
A14
A14 and so on ..
I need to find the no. of times or count A12 is there in the column A.
I have tried using .count function in the range A but this instead gives the number of cells in complete range A
I'm trying to figure out how to count by two criteria, only one of the criteria has a value among multiple values in a cell and the other is a range. I tried to use sum but it doesn't count the value and count doesn't recognize the range. I attached the file so you can see what we're trying to do.
View 4 Replies View RelatedI am trying to perform a count against two ranges of data.Both ranges contain contain values (dates in my case).I am trying to perform a count where cells in column A have data but cells in column B do not.
Is there a way this can be done in Excel 2003? I have tried numerous COUNT and SUMPRODUCT queries but have not found a way to get this to work.
I need a formula which I am using to count instance of sickness. I include a sample copy of my data which I hope will make my request clearer! I'm currently using the below formula to count the number of continuous instances of any code starting with "SICK" =(SUMPRODUCT((LEFT(C$10:C$37,4)="SICK")*(LEFT(C$10:C$37,4)<>(LEFT(C$10:C$37,4)))))
I would also like this formula to count any code starting with LTS as well (Long Term Sick). Due to the nature of sickness there may be continuous periods where both SICK and LTS codes are used, at the moment I can not come up with a formula to return the value I need. These columns may contain other codes but for simplicities sake I have only shown the relavent ones.
I need to be able to count all the blanks in columns other than A but only until the last used cell in column A. I am using a formula right now that counts the blanks in column A until the last used cell but I don't know how to apply the range of column A to other columns like B and C. Here is an example of what I hope to accomplish:
Formula used in A1 that I need applied to other columns but with the range of column A
="Total Blanks: "&COUNTIF(INDEX(A2:A8,MATCH(TRUE,A2:A8<>"",0)):INDEX(A2:A8,MATCH(2,1/(A2:A8<>""))),"")
Here is an example of what B1 and C1, with the formula, would look like if it counted blanks but with the range of column A
Total Blanks: 3
Total Blanks: 6
Total Blanks: 2
[Code].....
I would like to design a macro that can find a value within a cell in a colunm and copy a value in the row then count occurances of that value next time a match in the colunm is found on a different row, but also do this only if the date range in the row is within a specified range. So a multi-critieria search and copy operation.
To explain a little better here is a simplified example of my spread sheet that is in input for the macro.
A
B
C
D
E
1
PART NO.
date in
date out
comp1
comp2[code]......
Column A lists the coponents found on the same row as the seach critria, in this example "12-3".
Column B lists the number of occurances of the components. This search is limited to a date range input by the user.
So what I can see is the components replaced and the amount of times replaced on a specific item over a fixed time.
*It is difficult to describe this problem without showing the macro output, but this is just an example for the purpose of explanation.
I know a bit of VBA programming and initially I started with an input box that asks for the part number and limit dates.
I'm looking for a way to count the cells in a specified range if the cell contains a timevalue (such as: 0:05 or 1:15). When a cell in the same range contains a normal value (such as: 1 or 20) it should not be counted.
What formula should i use for this?
I was experimenting with:
=CountIF(N4:N50,">TIMEVALUE(0:01)")
and
=CountIF(N4:N50,">TIME(0,0,1)")
But both don't seem to work.
I need method, using a button, that looks at a cell--say EO2, for example--, looks back on a master worksheet at a specified row and range for a match, then looks at the information from a specified range below the matching cell (The information in this column will either be blank or have an "X" in the cell), and then those rows that do not have an "X" will be hidden in the corresponding rows in the working worksheet. Therefore, if at any time the value in "EO2" ever changes, then it will automatically find a new match and repopulate and hide information as before. About 130 columns will have its own button so that a "query" can be made that depends on the information in a particular cell in that column.
The master worksheet now has matrix of 287 rows and 58 columns. Each row is for an operating procedure and each column shows a job code. An "X" in a coordinate cell for a column/row shows whether that job code is responsible for knowing that operating procedure. So, on the working sheet, an employee's primary job code is given underneath his or her name. When the button is pushed, all the operating procedures not required for a given person will be hidden and only the required ones will remain visible--grouped, if you will. Qualification dates will be easier to see now that the information is consolidated. Whenever someone transfers to a new position, a new code will be inputed on the working sheet. When the button is pushed, a new grouping will result. Any operating instructions that overlap will still have qualification dates, so that information will not need to be transcribed.
Basically I have three sheets. MAIN, Sheet 1 and Sheet 2
Sheet 1 and 2 are in the same format
A3 down is a list of country names and then B3:I71 contains the data im interested in.
I've been trying to create a function that looks at B3:i71 to see if any cell in that range contains a value greater then $0.00. If it does then the row that contains the cell with a value greater then $0.00 (between col A to K) should be copied to sheet MAIN from cells B3 down. This should ultimatley produce a list of data for any row containing a value greater then $0.00. This process should then be repeated on Sheet 2 and should join the list below sheet 1.
Trying to copy a range from Sender.xls (sheet) Lists backstage
onto Userform.xls (sheet) Behind the Scenes
When trying to copy the values within a multicell range, the destination cell range (same size) becomes blank.
I need to count how many times the word Test is in the range B4:H9 with
Range N2 = Test the formula below works if Test is only in the cell once.
=COUNTIF($B$4:$H$9,"*" & N2 & "*")
But I have data in cells like below, this is all in one cell, so how would I have it count all the times test is in the range when some cells have test 2 or more times in a single cell?
5
Test
8am-2pm
Test
5pm-10pm
I have a Choose function that is used to determine which range I need. e.g. =Choose(Choice,Cell,Cell,...).
In each corresponding "Choice" cell is a typed range. e.g. $B$33:$L$70
I'm looking for a way to be able to use this typed range as the range for some chart data.
I am trying to write code to select a range in a worksheet where the last cell in the range is variable.
Sub DataTest()
Dim LastColumn As Integer
Dim LastRow As Long
Dim LastCell As range
[Code].....
I know that I can return the value of a defined name range, the address, and even the value of the define name, but if you are given a range address, how do you find its corresponding defined name in code?
View 4 Replies View Relatedi want to match a cell data with a range of cells and if matches return the cell reference in another cell
View 3 Replies View RelatedI am trying to create report of the in and outs of tools we are shipping for repair.
Currently in Tab 1
Column F - Date shipped for repair
Column G- Vendor Name
Column H- Date Returned
What I need in Tab B
Vandor - Total Sent- In Repair @ Vendor- Total Repaired - Total Unrepaired
Here are Images if it makes it a little easier to understand
The Info I currently have
image1.png
The info I required filled out based on the previous data
image2.png
I need to have a single cell tell me (either by returning a certain word or colour) if any cell within a range of cells (a)(all within the same column) contain the same text as another cell thats located somewhere within a different range of cells (b)(again within thesame column).
View 2 Replies View RelatedLine of code that will Select a Named Range in this case I have Named a CELL "DataSummary" Need to use that named range by selecting 30 columns and 54 rows.
Range("DataSummary),(??,??) doesn't work.
I have a workbook with two sheets. The first sheet is the data sheet.
Data Worksheet
A B C D colA colA,B colA,B,C colA,B,C,D
104 20 21 CR10600S 104 10420 1042021 1042021DUS
104 20 21 CR10600SX 104 10420 1042021 1042021DUS
104 20 21 CR10603S 104 10420 1042021 1042021DUS
104 20 21 CR10603SX 104 10420 1042021 1042021DUS
104 20 22 CR49605S 104 10420 1042022 1042022HKZ
104 20 22 CR49605SX 104 10420 1042022 1042022HKZ
104 20 23 CR39601P 104 10420 1042023 1042023SPR
The next sheet is where the magic happens. Separate this worksheet into two sections. The reference section (column A and B) and the entry section (column E-G). Column D is a formula that will concatenate column E-G together. In the entry section any number of combinations can be entered. In the reference section I need to take the style number and reference it back to the data sheet. Then take the possible combinations from that style (column E and greater) and see if any of those combinations exist on the other sheet in column D. If so then say added....otherwise say needed.
"....In Pricing Sheet" is where I am looking to put needed or added or something like it.
A B C D E F G
STYLE …IN PRICING SHEET Concat DEPT MCL SCL STYLE
CR10600S Added 1042021 104 20 21
CR10600SX Added 1042022 104 20 22
CR10603S Added
CR10603SX Added
CR49605S Added
CR49605SX Added
CR39601P Needed
Any ideas on how to do this in formulas and without code? I have tried and looked into index, match, dget and lookup. I just don't think I am finding the right combination of formulas.
Trying to count how many days from a set range of dates are within another range.
So for example, the first two dates, 7/29/2014 - 8/5/2014 would be 6
7/31/20148/6/2014 are the set dates
Count Days Within Range.xlsx
Is anyone able to see where i went wrong, i am tring to make a function sumproduct using dynamic ranges. i can do the same thing using arrays which is simple(below), but not using ranges, below. the range is dependent on a the number of selected choices, hence the ubound.
View 8 Replies View RelatedI have two ranges that show parts of a question to be answered and those parts already answered (aa6:aa55 and ab6:ab55). I would like to count those elements where the value in column AA is greater than the corresponding value in column AB, showing questions with parts still to be answered. Currently I have a formula comparing the two and am counting the occurrences of true or false. This seems to be overkill and I am sure that there is an array formula that can do the same thing more efficiently, unfortunately I cannot figure it out.
View 5 Replies View RelatedI have the following formula that is supposed to grab a value from C2 and check for that value in a range of cells and if it matches it is supposed to display the corresponding value in another range of cells. What am I missing??
=IF(C2='Google Doc'!$B1122:$B1266,"'Google Doc!K1122:K1266'","Not OK")
