# Dividing Cell By Another Cell Of Same Row But Different Column

Jan 18, 2014

I need to divide Cell A1 by another cell in same row but different column. The column number will be based on a reference cell. If ref cell =6 then formula would be A1/a6. Seems simple and more than one way to do it via cell formula. I will be copying and filling this formula down many rows, but cell reference will remain fixed for all.

## Dividing Data In A Cell If Conditions Met In Another Cell

Jan 4, 2009

I'm a Graphic Designer and am just starting to learn how much fun Excel can be. I'm still learning things though and this is an easy one I think, but I can not figure it out.

All I want to do is the following...

If there is any data present at all in column B on a particular row, then I want the number on the same row in Column D to be divided by 2.

In the example below... TB_5129-001 is present in B8. So I would want \$45.00 (D8) to be divided by two automatically. Also, if B8 were to be blank i would want D8 to be left alone.

## Dividing Multiple Arguments In Same Cell

Jul 26, 2014

V = 100 x [E /(IY + YP)] x Sqr. [((R + G)/2 / (IY + YP + F)]
V = 100 x [6.10 /(5.60)] x Sqr. [((10.2+2)/2 / (5.60 + 2.1]
V = 108.93 x Sqr (.79)
V = \$96.89 / share as of 7/18/2014

E = Earnings in \$ / share 6.1 (b9)
IY = Interest rate in % 5.6 (b10)
R = Profitability Factor in % (internal growth rate)10.2 (b11)
G = Earnings Growth in % / yr. 2 (b12)
F = Inflation Rate in % / yr. 2.1 (b13)

Here's what I have, result should be \$96.89, I need to tell excel to take square root of everything to the right not just (B11+ B12)

=100*(+B9/B10)*SQRT(B11+B12)/2/(B10+B13)

## Diagonally Dividing Individual Cell

Nov 5, 2008

how could divide one single cell in diagonal direction ?? without using line from drawing tool.

## Dividing Range Of Cells With Given Cell Having Formula?

Sep 3, 2012

I am working an Excell sheet. It have many cells with formula like sum of a range of cells etc.

I wanted to divide a range of cells with the given cell (which is inturn having a formula for sum of a range of cells.) want i wanted is to divide a range of cell values with a given cell whose value (number) is obtained through a formula.

when i do

=100*(v65)/v20 for T65 cell and copy the formula for T66-T106 cell range

it is calculating for T66=100*(v66)/v21 and T67=100*(v67)/v22 ........T106=100*(v106)/v61

what I want is all the cells T66=100*(v66)/v20 ... T106=100*(v106)/v20.

## Dividing Number Of Steps In One Cell Into Multiple Cells?

Aug 15, 2014

I have the onerous task of dividing up a series of steps in one cell into multiple cells. I tried the text to columns utility, but it only delimits once, not multiple times. Below is a data example:

2) Login using Administrator Access details .
3) Click on icon 'Admin' on the right hand side of page.
4) click on subcategory 'Administration'"

2) Login using Administrator Access details .
3) Click on icon 'Admin' on the right hand side of page.
4) Click on subcategory 'Administration' .
5) Click on any Organization name from 'Organization' section in the list.
Or click on 'Add Organization' icon in section 'Organization' .
6) Validate field 'Parent Organization' in 'New Organization' or 'Edit Organization' form"
2) Login using Administrator Access details .
3) Click on icon 'Admin' on the right hand side of page.
4) Click on subcategory 'Administration' .
5) Click on any Organization name from 'Organization' section in the list.
Or click on 'Add Organization' icon in section 'Organization' .
6) Validate field 'Tenant ERP Accessible' in 'New Organization' or 'Edit Organization' form"

2) Login using Administrator Access details .
3) Click on icon 'Admin' on the right hand side of page.
4) Click on subcategory 'Administration' .
5) Click on any Organization name from 'Organization' section in the list.
Or click on 'Add Organization' icon in section 'Organization' .
6) Validate field 'DMZ license key expiration period ' by click on checkbox or by 'Uncheck' checkbox"

I need to put each step into it's own cell.

## Simple Macro For Dividing Cell Content By 100 Needed

Dec 14, 2006

I'm only starting to get into the Macro side of excel, and I've created a couple of macros to automatically format cell contents and the like.
However I'm having trouble trying to divide some cell contents by 100.

I have 2 files I'm working with, one contains information regarding cd's and percentages, however the percentages in this file cannot be formatted to percentages (so the powers that be say) for whatever reason.
I copy all this information into another file which does have the percentages formatted as percentages, the result is that the values get multiplied by 100.

So values that read:
100
50
50.25

for example, appear on the new sheet as:
10000%
50000%
5025%

Is it possible to write a macro that will divide these percentages by 100 so the read correctly as:
100%
50%
50.25%

the macro will have to work on selected ranges.

## Excel 2010 :: Dividing Numbers By Number Of Cell They Are Found In?

Feb 13, 2012

I am using excel 2007 or 2010.

I need to divide the numbers on sheet 1 column D. This column contains numbers and blank cells so I need to divide by the actual number of cells that contain only numbers. I will be referencing the divided numbers on sheet 2 in a monthly summary format.

## Dividing Hard-coded Data By Named Fixed Cell?

Feb 6, 2014

I am trying to divide hard coded financial data by a named cell that will allow me to toggle viewing the financial data in dollars, thousands of dollars, and millions of dollars. I have named my toggle cell _000s and I have used Go To Special to highlight all of the hard coded data in my financial spreadsheet. Once I have done this I would like to Copy my _000s toggle and divide the hard coded values by this cell. I am using copy and then paste special divide by but I am having no luck with this tactic.

faster more efficient way to go about this rather than individually changing each hard coded item?

## Dividing Output Of Sumproduct Formula By Count Of Specific Cell Contents

Aug 21, 2009

I've got the following sumproduct formula (which seems to work):

=SUMPRODUCT(--(ISNUMBER(SEARCH(\$B17,Product_Keywords))),--(YEAR(Invoice_Date)=H\$3),--(ROUNDUP(MONTH(Invoice_Date)/3,0)=H\$4),--(Invoiced_Amount))

B17 is a keyword to be found in the Product_Keywords range

I'd like to modify it so that:

ifthe cell in the range Product_Keywords also includes "," thendivide the sumproduct by the number of commas+1

Presumably I could add --(ISNUMBER(SEARCH(",",Product_Keywords) as one of the conditions,
but how would I keep track of the number of commas in the cell?

## Dividing Column In Equal Parts?

Sep 15, 2014

Dividing column in equal parts divide a column in groups with the same rows and the same total sum? For example, I have the column A as following:

8,942

2,807

2,568

5,818

5,818

596

8,942

4,390

1,607

890

8,772

1,103

The total number of rows is 12 and total amount is 52,254

I want to divide the column in three equal parts with the same total. So each group must contain 4 rows with the total sum 17,418

## Search Column E For Value - Copy Value In Corresponding Column A Cell To Another Cell

Aug 30, 2013

search column "E" for a specific text value (let's say "it"). When found, copy the value in column "A" for the corresponding row where "it" was found to another cell "F2". When copying to cell "F2", if a value already exists in cell "F2", then no nothing else copy the value. If no "it" was found in the column, do nothing. I will continue to search, but since I am new to VBA it takes me a bit to find what I specifically need.

## Multiply Cell In Column A If Cell In Column B Is Equal To 5?

Mar 25, 2014

How can I multiply let's say A1 to 10 if B1 = 5

or multiply next cell like A2 to 15 if B2 = 10

## Copy A Column Cell If V Column Cell = YES Then Repeat

Jan 26, 2010

Sub Printstuff()
Application.ScreenUpdating = False
For Each cell In Range("V168:V246")
If cell.Value = "YES" Then

'enter the name that is in The A (of the row with Yes) column in A2
'Run Sub Individual
'Print
'Run Sub View All

End If

'Next "Yes"

End Sub

## Excel 2010 :: Repeat Cell Data Based On Another Cell Column Dragging Down

Apr 24, 2014

Formula that will repeat a cell number as it drags down and as soon as the number changes. I am using helper column that shows the cell number. I need to drag this down about 1000 rows.

Excel 2010
A
B
C
1
Helper Column
Desired Result

[Code].....

## Loop: Macro To Go Through The Table And Preform An Operation In The Corresponding Cell In Column B Depending On The Value In Cell A

Mar 27, 2007

I have 2 columns and 10 rows (A1:B10). In column A are certain text values. How do I write a macro to go through the table and preform an operation in the corresponding cell in column B depending on the value in cell A? for example, if A3 = "Complete", overwrite the formula in B3 with the value (paste value)?

## Move Down Column And For Every Blank Cell Clear Contents Of Cell To The Left?

Jun 1, 2014

i need a code that moves down a column and for every empty cell in the column the cell to the left is cleared and then it moves on to the next cell down. the column is not always the same and will start from a selected cell, and the column will contain no more than 5 rows

## VBA Macro Code To Copy Cell A1 And Paste In First Empty Cell Down Column D?

Jul 30, 2013

Is this possible using code: Copy Cell A1 and Paste in first empty Cell down Column D. This would be connected to a command button. Both Cell A1 and Column D are on the same spreadsheet.

## Find Last Cell In Column And Paste Formula In Next Blank Cell Then Repeat On Remaining Columns

Jan 14, 2013

I need a macro to find the last cell in the column, then copy the formula to the next blank cell. Then, it goes back to the last cell (above) and paste's values. Then, go to the next column and repeat the process. I can do this but have to call each cell separatly...however, I would like to do it in a loop to simplify things. It would be great to even be able to just set the start and ending columns. Here is my current code:

Dim rng As Range, aCell As Range
Set rng = Range("C8, D8, E8, F8, G8, H8, J8, K8, L8, M8, N8, O8, P8, Q8, R8, S8, T8, U8")
For Each aCell In rng
Selection.End(xlDown).Select
Application.CutCopyMode = False

[Code] .......

It does not go to the next column, instead it stays in the same column and repeats the process.

## Search Column For Cell Starting With X Then Copy Row To A New Tab Based On A Cell Value

Jan 13, 2014

I have an tab with 20,666 rows that I need to separate into different tabs based on what a cell in a specific row starts with.

Data Tab
001-020-002-000 Walker River Irrigation DistPO Box 820 YeringtonNV89447
001-020-005-000 Walker River Irrigation DistPO Box 820 YeringtonNV89447
001-020-006-000 Walker River Irrigation DistPO Box 820 YeringtonNV89447
001-020-007-000 Walker River Irrigation DistPO Box 820 YeringtonNV89447
001-020-008-000 Walker River Irrigation DistPO Box 820 YeringtonNV89447

[|Code]...

So what I am looking to do is search the APN row in the Data Tab that starts with the number from the APN # row in the APN Tab and then copy the row to a new/existing tab named after the Description on the APN Tab.

I think that I have explained what I need to do

## Get Text Inside Cell Which Is To Left Of First Blank Cell Of Column?

Mar 24, 2014

I want to get the text inside the cell which is to the left of the first blank cell of a column.

I show the problema in the attach imageSin tÃ­tulo.jpg

## Return Word In A Cell To The Cell In Next Column - InStr Not Working

Jan 27, 2014

I am trying to write a sub for using vlookup. To enable the vlookup, I want to return a word in a cell to the cell in the next column. I use the InStr function, but it doesn't work. They all return as "Other".

Attached is the worksheet and here are the codes : Capture.JPG

[Code] .....

## Excel 2010 :: Select Range From Given Cell And To Last Row And Column Of That Cell?

Oct 2, 2012

I am using 2010 and want to select a range starting at the same cell all of the time (regardless of whether or not it has contents - so let's say B7. Starting at B7, I want the range to include all of the columns starting at B and go to the end of all of the columns. Then I want the range to include all of the rows starting at B7 and end at the last row. I will eventually copy this range and paste it on another worksheet start on a specific cell of another worksheet. (Perhaps, we can add a name to this range).

## Insert Today Date In Specific Cell When Any Cell In Column Changes?

Nov 12, 2013

I would like to know how to use a VBA code to insert today's date into a specific cell (B9) when any cell in column B (B2:B8) has changed.

## Macro To Make Bottom Cell In A Column Equal Top Cell

Feb 5, 2014

I am trying to write a macro that will make the bottom cell in a column equal to the top cell. The top cell will not always be in the same row and there won't always be the same number of cells.

## Find Last Number In Row / Add 1 To Current Cell (if Another Cell In That Column Has Text)

May 23, 2014

file storage

1. Look at the "Days so far" section

2. Ignore cell C1

3. All the other cells in that row are shaded blue. Look at these.

4. Look at the "Volunteer" row - all the cells in that row are shaded blue. Look at these.

5. Wherever a name - any name - appears in the "Volunteer" row, 1 is added to the previous number in the "Days so far" section and the result is displayed in cell from the "Days so far" row above that Volunteer's name.

6. For example, we begin in C1 with a count of 12 days so far - this was manually entered

7. In cell H5, we see Henry has volunteered 1 day. The total no. of days so far should now be 12+1. Therefore, the number in H1 should be 13.

8. In cell G47, we see Joseph has volunteered 1 day. The total number of days volunteered BEFORE Joseph volunteered is 15 (see cell D43). But now, with Joseph volunteering 1 day, the total no. of days so far should now be 15+1. Therefore, the number in G43 should be 16.

9. what formula l must put in the "Days so far" row (excluding cell C1, which is manually input) to give me the "should be" results predicted in that row? I'm guessing it will be a formula which looks at each row fragment of the "Days so far" row, row by row, right up to the previous cell in that row, all within one formula.

P.S. I just want to leave the "Days so far" row blank, for any columns where there are no volunteers in the "Volunteer" row, so please don't give a formula which inserts zero for days with no volunteer, and then sums the cumulative total.

## Find All Instances Of Cell In Column & Check Offset Cell

May 21, 2008

how to explain this except by showing it, so I explained it as best I could in the attachment. Anyone think they have a solution for this? Let me know if you need more information. Thanks!

the macro will look at the value I entered in cell A1, then find all instances of it in Column A
in every row that A1 matches, if the value in column E is "0", I need the macro to change the value in column E of that row from "0" to (that row's column B * \$B\$1)

## Find Cell Value In Column & Return Text In Adjacent Cell

Jun 10, 2008

I have a drop down list in a merged cell B12-F12 and B13-F13 and B14-F14 . . . B30-F30.

I need the adjacent merged cell to populate a reason (text) based on the text answer in the drop down list or the entered text in the first merged cell. For example in the cell B12-F12 the user picks from the list or types in "Amiodarone." I want the adjacent merged cell G12-J12to automatically fill with "Heart Rhythm." I also want to be able to set up multiple if - them statements like if Amiodarone is entered then fill adjacent cell with Heart Rhythm and if Toprol XL then fill adjacent cell with Heart / Blood pressure and if simvastatin then fill adjacent cell with Cholesterol, etc. I have about 30 different options for cell 1 that I want to have auto fill in cell 2 based on the contents of cell 1. I've attached my file.

I want the user to be able to choose from the list or type the drug name in.

## Change Cell Color Of Maximum Cell In A Column?

Sep 11, 2012

I need to just highlight the maximum value in a column. This will be for several excel sheets within powerpoint, and preferably automatically updated?

Something along the lines of:

VB:
If
Ax = Max(A1:A3)
Then Ax = red
Else = white
End

## LOOK For The First Full Cell In Column That Is In Reference To Cell On The Left?

Sep 4, 2013

I have got this working so far:

=LOOKUP(D9,'Financial Snapshot'!\$H\$5:\$I\$95)
D9 = 1.01
D10 = 1.02 etc

[Code]....