here is an example of what my data looks like:
Book1.xls
the numerical data under the colors is the cost to make an item that color. i need a way to say that i have "n" of each color available to make and then a way to tell me which items to make which color for the lowest cost.
So, I have a table of scores from players for a category I have. It looks like this:
Place-------------Name-------------Country-------------Score
1st---------------Jim----------------USA--------------------376
2nd--------------Michael-----------Germany-------------364
2nd--------------Tim---------------USA-----------------364
4th---------------John--------------Norway-------------355
if one of the guys, for example, John were to improve his score to a 369, I'd change the score in Excel, then use the sort feature to put him above Michael and Tim. Only problem is, it would say his place is still 4th place, and it doesn't change to 2nd place.
I want it so the "Place" column automatically changes to the correct rank based on the score the person has. So if I changed John's 355 score to 369 and hit sort by A-Z, Excel would automatically change the "Place" he's in appropriately so it would look like this:
Place-------------Name-------------Country-------------Score
1st---------------Jim----------------USA--------------------376
2nd--------------John--------------Norway--------------369
3rd---------------Michael-----------Germany-------------364
3rd--------------Tim----------------USA-----------------364
I have an excel ranking 8 participants in a tournament.
In the excel you can see the people participating and there cumulative score next to their name.
What i want to do now is create a table that reads:
Cell A Cell B
1st place "name of individual with minimum points"
2nd place "name of individual with min points, from the leftover people"
""
8th place
I have used vlookup function, but I can either get it only to display first place individual but not the rest, sometimes it wont work because values of peoples scores have to be in ascending order.
I'm looking to populate tables for specific tasks that my site performs and compare their performance against the other top sites in the company. I need to pull the site # and their performance based on the task, ranking them from first to last.
View 5 Replies View RelatedRanking values and ranking duplicates the same rank I'm looking to rank a group of numbers that will possibly have duplicate numbers that I want to show as a tie but have no break in the rankings.
Example:
20
18
18
15
12
11
11
9
The ranking I am looking for is:
1
2
2
3
4
5
5
6
I am facing some problem with ranking formulae. Attached is a file illustrating them.
Problem 1: Ranking without zero I have a set of data for products. They have a number next to it. Some of the products have a ZERO value next to them. I want to rank the data in an ascending order while ignoring the products with ZERO value next to them.
Problem 2: Ranking on multiple factors I have a set of data for 50 products. There are 5 factors based on which I want to pick the best and the worst. Each factor has a value which can be a negative number, zero or positive number.
This is what I am doing presently: Ranking the products on each factor in a separate column. Points are assigned based on the ranking, i.e. if the ranking of "product A" on Factor 1 is 32, then it gets 32 points It is assumed that equal importance [weight] is given to each factor, thus average points is calculated based on ranking of each product on each factor. Average points are again ranked in descending order The top & bottom 10 are picked from this ranking.
Number of products and number of factors can be different for each analysis. Presently I am giving equal importance to the rankings for each of the factors, what if I have to give varied importance [weight] to the factors.
In the attached spreadsheet I track the performance of my team. I enter the AHT for my team in the work sheet named "AHT Summary".I keep updating this data every month. automatically sort the updated data and rank the agents based on their average AHT. The person with the lowest AHT should be ranked 1. Column is highlighed in green for your reference. Based on this ranking the work sheet named "Ranking" should be updated automatically. Since I am taking a weighted average for all agents, the one who gets the lowest AHT should be ranked 1st . In the ranking work sheet the agent with ranking 1 should be given 100, the second highest ranked person should get 98,third 96,fourth 94 etc.
View 6 Replies View RelatedI have a workbook of data that I created a pivot table with. From there I need to rank each value of the NES, column C, within the corresponding Reporting Structure, column A. The table that I created will be update with data on a monthly basis and I don't want to have to redo the rankings every month and just have it refresh.
View 2 Replies View RelatedI am trying to rank via data in two columns to eliminate any tied rankings.
I need to use the data in columns "AW" & "AX" to compile the rankings.
The ranking needs to be calculated by the highest number in column "AW" being ranked #1 and the second highest ranked #2 etc etc......any ties as a result of this ranking need to be broken by the lowest number in column "AX", the lower number being the higher in value and thus being the higher ranked.
For example:
AW AX RANK
13 89 7
13 63 4
14 89 2
14 81 1
13 90 8
13 66 5
13 58 3
13 87 6
I have attached the spreadsheet that I am using.
Which formula do you recommend I can use to rank the below fields in yellow. I need to find the following:
1 - Which sales advisor (their name) has got the highest MPPI conversion and place it in cell K32.
2 - Which sales advisor (their name) has got the highest HC conversion and place it in cell K34.
3 - Which sales advisor (their name) has got the highest Highest Apps conversion and place it in cell K36.
I have a spreadsheet with values as per below
I can rank the data based on descending values in Columns B & C using the formula in cell B2
=RANK(B2,$B$2:$B$11)+SUMPRODUCT(--($B$2:$B$11=B2),--($C$2:$C$11>C2))
What I trying to do is also rank the data based on the values in column D as an additional tie-breaker
RankScore 1Score 2Score 3
1412315
2402420
2402422
4402030
5392015
Ranking in excel.
Column A - List of students Names
Column B - Grades of Students
Column C - Rank
The problem is, when I rank the students (order highest to lowest) the data in A and/or in B also moves.
What I want to accomplish is that the data input in columns A and B stay as is and Column C shall indicate what is the ranking of that student according to the number of data entry. i.e. 1st, 2nd, 3rd or 1,2,3 respectively.
I have 4,300 cells populated with data. I have sorted the data and now I need to rank the data in 1% increments. For example, the first 1% of data (43 cells) will be ranked #1, the second 1% of data (43 cells) will be ranked #2 etc. How could I automate this process? I was trying to figure something out with the "Rank" command but that doesn't seem to work in this situation.
View 3 Replies View RelatedI have a spreadsheet with a list of ID's in column A. In Column B I have a list of ratings. Each ID has more than one rating. For example there may be 8 rows with ID 1, 12 rows with ID 2, 6 rows with ID 3 etc......
I want to rank the ratings in Column B with highest being 1 but only when the ID's are the same. For example there would be 8 ratings ranked for ID 1, 12 for ID 2 etc.....
The problem is I am running a monte carlo simulation on the rating of around 10,000 simulations. Every simulation the rank for each row will of course change because the rating has changed. The spreadsheet has around 70,000 rows and over 3000 ID's.
How can I do this without either the computer becoming a crawl or freezing up and it not taking 30 minutes for each step of the simulation?
I'm trying to achieve a table of weighted ranking based on correlations, a table I already have like the one given below
John / Products Owned 1 2 3 4
Shoes Socks Polish Brush Lace
Trousers Shoes Socks Belt Polish
Wallet Belt Trousers Shoes Socks
What I'm trying to achieve is this:
for all the top 4 correlations given for each product owned, i need to consider the ones not owned by John and recommend overall rank of the following nature:
For instance, the rank of socks here will be (1+2+4)/3 = 2.33, the rank of belt will be (5+3+1)/3 = 3 [ I'm considering the rank of belt as 5 for shoes, since it doesn't occur in the top 4 ]. Shoes, here will not be ranked since it is already owned by John.
I'm struggling to translate the logic into code here. Currently I perform it in a cumbersome manner, copying all columns to one column, then performing a pivot to find repetitions and so on.
Perhaps there's a function that could scan a dynamic sized table here, find the unique items and number of times they're repeated?
Item Quantity
A 2
S 7
D 3
F 6
I am looking for a ranking formula that will pull the data from the
first column based on the ranking of the second column
so that the end result will look like this
1 S
2 F
3 D
As S has the largest quantity, F 2nd largest etc
The list I will pull this from is variable in length but in the
hundreds.
I have a table of data which represents data in different categories by week.
My ultimate goal is to have another table representing the data for each month - for instance - for each of the categories the data for :
06/04/2009
13/04/2009
20/04/2009
27/04/2009
is summed to make the data for the month of April.
The way I'm doing this at the moment is very long-winded
I'm using a whole new table - the size of the original weekly one - for each month. A calculation decides whether to effectively leave a cell blank or insert the appropriate data based on a date being within a particular range.
So in each "month table" there is the same list of week values:
06/04/2009
13/04/2009
20/04/2009
27/04/2009
04/05/2009
11/05/2009
etc.
but for each "month table" only the cells adjacent to the dates within the relevant month will return actual numerical values within them
This is an example of the forumula I am using in these tables:
=IF(AND(($AD7>=MIN($AE$5,$AE$6)),$AD7<=MAX($AE$5,$AE$6)),$C7,"NA()")
Then a master table sums the totals for each month.
I want to be able to keep this table but get rid of the ones for every month as the sheet is getting unwieldy!
I have tried several times to attach the sheet for clarity but each time upon trying to "Submit New Thread " I am getting page not found errors - the sheet is only 133KB and I have tried zipping and sending also - I can't make it any smaller.
I have created a table in Excel 2010 (pls see attached table named post.xlsx).
Then copied the above table into PowerPoint 2010, using "paste link" (I tried to attach the PowerPoint file but the system says "invalid file type" and I cannot attach it).
Question:
I have received income data for another month - the new month is 13 and the corresponding new income is 100.
I typed 13 and 100 into the Excel table post.xlsx and thus extended the table by another column.
Then I went back to PowerPoint slide, then right clicked on the table there, then clicked "update link".
Specific Question:
The newly-typed column in Excel table is not get updated in PowerPoint table.
I have enable Refresh on Open for my excel pivot table, but user need to click "Enable Automatic Refresh" , only solution i came across is to change the registry setting. Which i dont have access to edit registry(admin disable the access).
Alternate solution i try to use Access macro to automate the process and use Outputto save it as a excel file A. Then use excel file B to update pivot table from excel file A.(as excel A data is always latest)
The problem is i will get "....A file name already exist...do you want to overwrite.." prompt.
Which defeat the automate process.
Any other solution to enable the automatic refresh on open the excel workbook?
Or Access can overwrite the exist file or save it as another file name with timestamp ?
In the attachment you will see an example of what I am trying to accomplish. What I am trying to do is find VBA code that is either specific to this worksheet or in a macro. When the sheet is opened I enter a date in B2. I then enter data into A7, B7, and C7. What I would like to happen is when the data is entered into A7, B7, and C7 the sheet goes and finds the same date that I entered in B2 and copies that data from A7, B7, and C7 into F7, G7, and H7.
View 2 Replies View RelatedI would like to have a macro to automatically generate a statistics table (on the "statistics" tab) with the 5 following fields:
Fragment names / # samples / # of failed samples / % of success / # of variations in the fragment (SNP). At the bottom of this table, I would like to have a cell with the average % of success for all fragments. The data to generate these statistics are on the "gene name" tab (please note that this name will change every time I will work on a new gene). To make things easier, I think the macro should be run from this tab.
1. The Fragment names are displayed in row #5. I use one column per variation per fragment. If one fragment has 3 variations, there will be three columns and I will merge together the fragment name cells. The fact that some cells are merged can be a problem when copy-paste to the stats table (as I would like to get rid of the merging).
2. # of samples corresponds to the number of cells in blue in column A. The number of samples can change from one report to another but is always constant in the same report.
3. # of failed sequences. In the table, I type "Failed Sequence" (if the analysis has failed) and "Missing Sequence" (if the analysis has not been done). When a sample is failed or missing, it is for the who fragment, no matter how many variation there is in the fragment, so I usually merge the cells of all variations for this failed sample.
4. % of success: this is quite easy #sample/#of failed+missing sequence for this fragment
5. # of variation is equal to the number of variations for this fragment (can be 0, 1, 2, etc.). When there is no variation in a fragment, I put '-- in all cells of the corresponding fragment on the "gene name" tab. Fragment 3 on my file is an example of 0 variation.
Is there a function to convert the data shown in table 1 to table 2 without rearranging the columns and rows? because i don't want to use TRANSPOSE. I want a function, somthing like SUMIF with OFFSET or INDEX and MATCH or any other function.
Table 1
Team 1Team 2Team 3Team 4Team 4Team 5Team 5ABABCity 12531642City 231173705City 367891125City 436251348
Table 2
City 4City 2City 1City 3Team 4BTeam 2Team 5ATeam 4ATeam 1Team 3Team 5B
Table 1
January-12
February-12
March-12
Table 2
Sr. No
Name
Dep
Lates
CL / SL
AL
Lates
CL / SL
AL
Lates
CL / SL
AL
[Code].....
I created a lookup table that works quite well. It even has if statements in the LookUp Formula. However, I have to update the table it pulls the information from each day. I wind up recreating the range each time because the table always has more rows each time. Is there a way I could just paste the table in each day and not have to change the range? The columns never change.
View 9 Replies View RelatedI have a large table that I want to reconstruct. For simplicity sake, let's just says it's 3 rows (excluding headers) by 3 columns.
Item Description
1/1/2014
1/2/2014
1/3/2014
Cheese Burgers
2
3
4
Hot Dogs
5
12
6
Beverages
2
5
3
I want to reconstruct it so that the column headers become values in the table. The table headers are dates, in this case, if that gives clearer picture. So the new table would have 9 rows, (3 rows of data, excluding the header times four columns).
Item Description
Date
Quantity
Cheese Burgers
1/1/2014
2
Hot Dogs
1/1/2014
5
[Code] ....
The above example is sorted by date but I would be indifferent if it's sorted by the Item Description.
Is there an easy way to do this? Pivot possibly? Again, my data table is large: 36 rows x 181 columns. Using the copy/paste/transpose feature is pretty impractical.
I was wondering if there is any way possible to link your pivot table filters to filter the data the same way in the table that it comes from? So if i had date as one of my headers and i filtered the date to a specfifc date, is there a way to also filter the date in the data source sheet?
View 2 Replies View RelatedI have a table below that looks like this:
LOC
# of days
DTX
3
RTC
3
PHP
12
IOP
12
The # of days column will be a manual input. Then I have a larger table that will take those values and convert them to look like this: (Obviously the dollar values are pulled from somewhere else)
1
DTX
$ 1,292.00
2
DTX
$ 1,292.00
3
DTX
$ 1,292.00
[code]....
I've been thinking of trying to use a macro but not sure that is the best way. Using a button or something doesn't seem very elegant either.
i have a pivot table an extract of each data contained in this table.
[img]Count of NAMdate
SERVICENAM12-oct10-déc11-décGrand Total
Commercial-lauralaura11
Commercial-laura Totalgh11
custody-jonathanjonathan112
k11
custody-jonathan Totalgh1113
settlement-ludovicludovic11
settlement-ludovic Totalgh11
SPQC-elodieelodie112
SPQC-elodie Totalgh112
Grand Total1337
I did a data table yesterday and it worked. I tried again today and the results are incorrect. They are coming out as a constant (the same result as the original formula). Has anyone had this happen before and figured out how to fix? My spreadsheet is fairly complex. Does the data table formula need to refer to the "base" cells? For example, if the formula refers to cell F15, but in F15 the formula is +C15, does my data table formula need to use C15?
View 3 Replies View RelatedI have a table thats acting as a database analysing player data and I have a second table in a report sheet based on the database table. In my report table I have a drop down with the player names at the top and I want the data cells underneath to populate based on that particular players data from the database.
View 1 Replies View Related