Time Variance
Apr 2, 2008
Column A has a time (no date)
Column B VLooks-up a value from a separate sheet per country, so it pulls through a the variance [-11 to +13] from UTC (GMT) time dependent on country.
All other data is irrelevant.
Let's say Column C has following formula: A2+B2/24.
This works where the time result (new time) is on the same day, but as soon as it crosses over midnight, it buggers up.
What I'm needing to do is take a list of events (server time/GMT) and convert them to the local time from where the event was triggered based on source country.
View 9 Replies
ADVERTISEMENT
Jan 26, 2009
I'm trying to calculate the variance between planned date & time of arrival vs actual date & time of arrival.
I attach the workbook as am a bit useless at explaining myself....
What I've done is in H14 subtract the actual date of arrival (F14) from planned date of arrival (C14). This result is the only way I could think of dealing with crossing over midnight. As a result I14 should subtract the actual time of arrival (E14) from planned time of arrival (B14):
=SUM(E14-B14,H14)
This method works well when the arrival was later than expected but doesn't work if the arrival was sooner than expected.
View 6 Replies
View Related
Apr 8, 2007
formula to work out a variance between two times
Using the 24hr time format in cell a1 i have a start time of 10:43 and in cell b1
i have an estimated time i think a job should take in this case 30 minutes and in cell c1 i have the actual time that job was finished in this case 11:07 and in cell d1 i have a variance between the two times which in this case would be saving me 6 minutes
View 9 Replies
View Related
Feb 6, 2009
i have a dynamic list of numbers....currently 10 numbers in the list.
how can i calculate the variance?
i have the upper limit (=MIN(1,(mean+half width))
i have the lower limit (=MAX(0,mean-half width)
i have the mean (avg of all numbers)
i have the t value (TINV(alpha, (n-1)))
i have the half width (t value * SQRT of Var/N)
i just don't know how to get the VAR/N
View 9 Replies
View Related
Apr 16, 2014
I am trying to get my variance percentage to calculate correctly but I am struggling when it comes to one of the value being zero. It works fine for the below example when both the variance and last year figures a zero.
Last Year This Year Variance Percetage
0 0 0 0.00% IF(Last Year=0, "",Variance/Last Year)
0 100 100 0.00% This should be 100%
View 6 Replies
View Related
May 18, 2009
finding a way to compare the two budgets i.e 08/09 and 09/10 and if a new cost centre appears in 09/10 it will bring a yes in column G(New cc) and if the Cost Centre already exist in 08/09 it will bring a blank--but in both cases i want a variance in the next column H i.e 09/10 less 08/09.
View 2 Replies
View Related
Apr 8, 2013
How to create like a random number generator or something. So like +.09 is 57% and -1 is 43% and for it to randomly generate like 100 numbers, so that I could graph it later.
View 5 Replies
View Related
Feb 21, 2007
I have a workfile with several worksheets.
I have the word "variance" appearing in some of the rows in column B and a value in column C which is in the same row as the word "variance"
for eg row B19 Variance C19 10
I need VBA code that where the value which is in line with the text "Variance" is greater than 5, the name of the worksheet is listed in the worksheet named "Variances"
See Example below
******** ******************** ************************************************************************>Microsoft Excel - Statistical Data.xls___Running: xl2002 XP : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutC13C14C16C18=
ABCD131110XFORD*UNITS*IN*STOCK86*141111XMazda*N/V*UNITS*IN*STOCK17*15****16Total*103*17****18*Variance0*East*
[HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name box
PLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
View 9 Replies
View Related
Sep 1, 2008
I need a formula to workout what is the most up to date firmware that should be installed on the machine. This will always be in column B. The second formula should work out the variance between the installed firmware and recomended. The formula cells will be normally held on a different summary sheet.
View 2 Replies
View Related
Mar 16, 2014
I am trying to do my homework for college and the below excel grid was given to us to complete. I do not understand where to get the information it is asking. the first grid is the numbers we are suppose to use to input in the other grids. We are suppose to put a formula in on the last to two columns on each grid but I do not even know where to start.
Budget
Actual
Product
SaleUnits
$/Unit
View 7 Replies
View Related
Jan 6, 2014
3 Sheet Excel document- What i'm trying to do is compare the contents of Column A sheet2, with Column J sheet3.
I would like only the variances printed on Sheet A. So- Sheet A says "The following was found in Sheet2!A, but not Sheet3!J"
Demo excel spreadsheet attached. Comparing "NASC Column A" with "RQ4 Column J"
View 4 Replies
View Related
Nov 25, 2013
I am looking to calculate variance across a large data set and would like to know if a macro is possible to calculate for a specific unique cell ID. East, Central, or West and calculate variance across that region.
For instance, in my data set if I have something similar to below. How would I calculate variance in the different regions? Is it possible to automate this process? Also could the Analysis ToolPAk be used instead or in conjunction?
OrderDate
Region
Rep
Item
[Code]....
View 4 Replies
View Related
Jun 1, 2007
I need to sum up the batch quantities for a date with variance one...
but it doesn't work... I suspect that I'm using wrong formula, it should be not SUMPRODUCT...
when I tried to use just SUM, it adds all the quantities in the colomn.
=SUMPRODUCT(--(($AB$11:$AB$100)=AK12),--($AG$11:$AG$100=1),($AD$11:$AD$100))
View 9 Replies
View Related
Feb 22, 2010
I need a formula that will display a 'yes' or 'no' if the following condition is met:
If the value of cell (L17) is greater than 10% positive variance, then 'YES' else 'NO'.
Currently the value of L17 is 14%, therefore should be a 'YES', however how can I get the following to work:
IF(AND(L17=<0,"NO",L17>10%,"YES"))
I apologise as I know there are too many arguements here but is there a way around this?
View 8 Replies
View Related
Mar 29, 2007
what is the formula to calculate variance in Excel between the actual data and the forecasted one?
View 9 Replies
View Related
Dec 19, 2008
I have a worksheet which contains START TIME in column A, then TIME USAGE in column B and END TIME in column C. User enters start time, followed by the number of time usage in minutes, how could i possibly display the end time automatically in this scenario? how do you add the entered time usage to the start time to display the end time? Say if I enter 1:00 AM at start time and 00:15 minutes on time usage, how can 1:15 AM be displayed on the end time automatically?
View 2 Replies
View Related
Feb 7, 2014
the vendor has a 21 hr working window; start from 7am and goes until 4am; Mon to Fri.
Here is a scenario:
- i request for a product information from a vendor on 3-Feb-14 8:00am (Monday)
- he replies with all of the product info on 6-Feb-14 12:00pm (Thursday)
can you find the time in above scenario consideration the working window?
Here is another scenario:
- i request for a product information from a vendor on 6-Feb-14 8:00am (Thursday)
- he replies with all of the product info on 11-Feb-14 12:00pm (Tuesday)
- Sat & Sun are days off but keep in mind that my Friday shift ends on sat at 4am so the networdays formula wont work.
View 2 Replies
View Related
Mar 3, 2009
I am trying to provide a tool for department leaders to monitor productivity for order processing in their departments. The variables I have are: Number of orders(variable), number of pickers (variable), start time(variable). Then, I know each order takes 1 picker 4 minutes to pick on average, and there are 45 minutes worth of breaks during the picking process. So after entering the variables I used =(((C3*4)/60)/D3) to come up with the time needed to process the orders. What I can't get to is how to add this number to the start time, factor in break minutes and get to the projected completion time. I have Excel 2003 at work. Clearly I need to take a class!
View 4 Replies
View Related
Mar 28, 2014
I am looking for a function to convert time given by my computer (Local time) in EST (Eastern Standard Time). We are several users of a same file (with timestamp macros) and all time need to be aligned to one time zone (EST), even if all users are working in different time zone (EST, CST and IST).
View 1 Replies
View Related
Mar 22, 2012
Consider this code:
'light eligibility
Dim facb As String
Dim sunset As Variant
[color=green]' check if facility has lights[color]
facb = WorksheetFunction.VLookup(RID, ds, 10, False) 'find facility code
If WorksheetFunction.VLookup(facb, fac, 6, False) = "Y" Then 'facility has lights
sunset = WorksheetFunction.VLookup(tempws.Range("A9"), sun, 2, False) 'lookup the sunset time based on the record's date
[Code] ......
This code checks the need for lights at a facility.
It first checks to see if the facility even has lights by cross-referencing a value in the record with a facilities database.
If it has lights, it then checks to see if they are needed. If the rental goes past the sunset time, then it needs lights. Sunset is determined by cross-referencing the date value in sheet1! A9, with the sunset database.
If it needs lights, variable lghtson is calculated equal to "sunset"-30 minutes.
As I step through this code:
WorksheetFunction.VLookup(facb, fac, 6, False) = "Y" Facility has lights.
Check to see if lights are needed.
sunset = WorksheetFunction.VLookup(tempws.Range("A9"), sun, 2, False)
sunset=0.879166666666667 which is 9:06PM. This is a proper value from the lookup.
If rental_end.value > sunset Then
rental_end (value from textbox) = "9:30 pm" , sunset=0.879166666666667. This is true, and Excel accepts it as true ...
lghtson = sunset - 0.5
0.379166666666667 = 0.879166666666667 - 0.5 (9:06 AM)
This is not the value I was looking for. I was looking for 8:34PM (0.856944444444444)
View 2 Replies
View Related
May 3, 2013
I am looking for a macros VBA where a user insert or update a data the date and time should be insert in column I and save the workbook.
Note: If the column I already have the date and time inserted before then it should give message record already have date and time.
I am using office 2010.
View 9 Replies
View Related
Mar 30, 2009
i am looking to do a table which shows time started, time finished and then a total for hours that day, then that week.
Start 08:00
End 16:00
Total 8 hrs.
How can I get the total to display as 8 hrs? not 08:00? When I change the format to "number" it shows 0.33?
View 9 Replies
View Related
May 5, 2006
I have a user form with textBox1 = start time (entered as "[h]:mm") and text Box2 = finish time (entered as "[h]:mm"). I would like textBox3 to display the difference between the start time and finish time as a general number!
For example
Start time: 21:00
Finish time: 06:30
Hours worked: 9.50
Start time: 12:30
Finish time: 23:00
Hours worked: 10.50
View 9 Replies
View Related
Mar 8, 2014
production01.png
I am trying to figure a way to search for a cell that has a specific date and time range. There are several cell titles pending on the activity. I want to find a cell that has a time ** 7:30-15:30 , 15:31-17:30, 17:31-20:30. The end result is to calculate the activity between those time periods based on the data cells.
Example
If the date searched time field ** the activity ranges is 1635 I need to split the time and credit the activity time in the 730-1530 time and the rest on the 15:31-17:30 time
I have been able to do it on a single labor group based on time alone, but when I try to add the DATE to it my numbers go null. Eventually i will need to add 11 labor groups daily for weeks at a time .
Excel 2007
View 3 Replies
View Related
Jul 11, 2014
A client buys 500 minutes of my time. In one week I spend 340 minutes on the account. I'd like a column to show Time purchased (say 500 Minutes) Time spent and a final section showing time left (but showing negative values in red)
I hope I've explained this ok but here is an illustration of what I'm trying to achieve in Excel 2011.
[URL] ...........
View 2 Replies
View Related
May 22, 2009
I am not sure that I can do this, but here is what I would like to do. I have a worksheet that I initial when I start a job in on cell and then when I finish in another cell. What I's like is to have a macro running in the back ground that will tell me the total elapsed time from when I started to when I finished.
View 5 Replies
View Related
Mar 7, 2014
I have a workbook with macro button to run some vba, if i want the button to disable when the user make copies of the workbook (date created is later than original wb saved time) what codes to add in the VBA?
what i assume is to add the time to a cell when the wb is saved, when the wb opens, it check for that cell if the same with the date created, if different, then disable the macro button.
View 9 Replies
View Related
May 23, 2008
I have a protected worksheet. Users wish to be able to track changes in the input cells. The suggested approach for this is to temporarily disable sheet protection and allow them to change the font color, then protect afterwards. What I would like to do is:
i) check whether they are in an input cell
ii) if so, then prompt the user with the 'Font Color' dialog box
iii) apply the font color selected to the input cell
I'm struggling to find the dialog box I need. I can launch the one to change the interior color, no problem (Application.Dialogs(xlDialogPatterns).Show). But that's no use to me, I just want a color palette that specifically relates to the Font Color
View 4 Replies
View Related
Apr 27, 2014
Formula to calculate time allotted minus time used and show the difference in hour and minute.
View 1 Replies
View Related
Jun 17, 2014
I have a time column (A) that when looked in the cell only shows AM & PM times, but the cell itself (not showing) contains dates too, keeping me from be able to do a sheet wide sort of time or time frame occurrences.
Can I do some thing to sort these cells with their corresponding rows based on time only disregarding dates?
I am trying sort out all rows that in column (A) is time equal to or greater than 4:00 PM OR even maybe sort all rows that column (A) shows a time between 4:00 PM & 7:00 PM. The date in the cell is the problem, I think. Excel 2013
View 1 Replies
View Related
