Extract Data From Multiple Sheets Into One

Aug 6, 2008

I am running into at the moment is that where the Select Case is checking if the sheet name starts with the initials and project number, it doesn't seem to recognise if it is correct (and therefore perform the actions). I have stepped through the code and when I use the immediate window to manually check:

? ws.Name Like "TA0632*"

I get True as an answer, but the code goes on to the next case as though it is false. Here is the code I have so far, which I'm sure can be trimmed down loads:

Option Explicit
Dim currCell As Range
Dim c As Long
Dim r As Long
Dim rng
Dim ws As Worksheet
Dim skp As String
Dim LastColumn As Integer

Sub Breakdown()
Dim t
t = Timer
For Each ws In ThisWorkbook.Sheets
Debug.Print "Current sheet is " & ws.Name
CheckSheet...................

View 2 Replies


ADVERTISEMENT

Extract Multiple Sheets Data Into One Sheet

Aug 14, 2014

Creating macro which can read data from one/or more sheet and copy and paste it into another sheet, by matching up column A & B and Row 1, between the both sheets.

I have monthly data stored in each sheet, named as May, June, July etc. I also have sheet called 'monthly' within the same workbook, where I would like to extract all monthly totals, from sheets july, June etc, into the 'Monthly' worksheet by matching up its names from Column A and B and row1 header with each sheet's names.

The june,july worksheets have date1, date2 etc, columns with data and after those columns, there are the 'bs, rm, cm, cd, cl' columns, and these are the columns, I would like to use, to extract the numbers from and paste in the 'monthly' worksheet.

My current issue, is that the 'bs, rm, cm..etc' columns are not fixed, due to the 'date1, date2 etc' columns can vary, for each month.

For this current task, I was using a formula as shown below to extract the values into 'monthly' worksheet, however due to unfixed columns for 'bs, rm, cm... etc', I could not get the formula to work for the 'july' and 'Aug' months (i.e. extract data into 'monthly' worksheet, from the june&aug sheets).

[Code] ......

I would like to request, if it is possible to use the formula below to re-create macro which can carry out this task, by extracting all the values from 'june, july, aug etc' sheet, into the 'monthly' sheet, at once.

I have attached a sample workbook with example of data layout and desired output shown in monthly worksheet.

data_extraction2.xls

View 7 Replies View Related

VBA To Extract Data From Sheets If It Match Condition

Nov 13, 2012

I wanted to extract the data from the sheets if it match condition.

In the sheet george, data is in the A9: AE500. in the B9:B500, there is date format (mm-yy).

In the H9:AD500, designed as checklist where update as "Y" if or nothing

I wanted to extract the data from this file to sheet Exctract if any of the cell in the H9:H500 not equal to "Y" and B9:B500 of sheet george is less than or equal to D2 of sheet Extract. in the sheet George, some row will be hidden, i wanted to bring the data from hidden rows also.

View 4 Replies View Related

Extract Data From Main Sheet To Other Sheets

Mar 29, 2009

I have already placed a siniliar question but I think it fell through the cracks or it was to difficult to understand!! I am losing my mind as the hrs tick down and I can't get this done

I have a detailed sheet called "detail"

I have 5 other sheets called "J1" "J2" "J3" "J4" "J5"

The sheets are exactly the same with headers already in. However "detail" sheet has all the detail and the "J" sheets are blank.

I need a macro in a command box that will start on line 5 of the detail section and look in column "D". if either of the "J"s are in column D then the row will be copied, cell colour turns green, and pasted in one of the 5 "J" sheets depending on the value. This process should continue to loop until there are no more lines left in "detail" to copy

I just can't get my head around how to write a macro that will perform this. I have searched through different threads and tried and manipulated a few but I can't get it to work at all. I think I am so frustrated after 8 hrs that

View 9 Replies View Related

Compare Two Excel Sheets And Extract Common Data?

Jul 24, 2014

i want to compare two excel sheets and extract common data in either sheet. For eg: If sheet 1 and sheet 2 contains some common data, i need to compare or lookup or whatever i do but i need to pull out that common data in sheet 2.

View 3 Replies View Related

Extract Data From Few Sheets To Master Sheet With 2 Match Criteria

Jan 8, 2013

i want the compile all information from few sheet (20) with same format on daily basis based on due and CF status cash flow. the format as below as the result will same as original format,

No.
Receive Date
PRF No.
Frank No

[Code].....

View 1 Replies View Related

Get The Index Worksheet To Extract Data From The Sheets That It Has Indexed: Hyperlinks

Oct 30, 2006

I am now trying to get the Index worksheet to extract data from the sheets that it has indexed, for example, it returns the sheet name, but i want it also to return the value that is contained in C2 and C3. Is this possible? I have attached the code which i am using below for ease of reference.

Private Sub Worksheet_Activate()
Dim wSheet As Worksheet
Dim l As Long
l = 1
With Me
.Columns(1).ClearContents
.Cells(1, 1) = "INDEX"
.Cells(1, 1).Name = "Index"
End With
For Each wSheet In Worksheets
If wSheet.Name <> Me.Name Then
l = l + 1
With wSheet
.Range("A1").Name = "Start" & wSheet.Index...................................

View 2 Replies View Related

Select Multiple Sheets And If Value In Cell Is True Then Copy Values In All Sheets And Hardcode Data

Feb 26, 2012

I have a workbook that updates from external source and creates sheets depending on a cell range.

I have put tab 1 and tab 0 on either end of where the new sheets will be inputted, will never know how many sheets

What i need to happen is if someone fills in "complete" in A7 in my "summary" sheet then the values in row 6 in all the other sheets get hardcoded. This needs to happen from A7 down to A26, so A8 = complete then copy row 7 etc
This is what i have so far

I get compile error here ........Sheets(ArrSh(1)).Activate

Also need it to work for all the other rows.

Sub hardcode()
'
'Sheets("Summary"). Select
If Range("a7") = "complete" Then
'
Sheets(Array("1", "0")).Select
Sheets(ArrSh(1)).Activate

[Code] ......

View 2 Replies View Related

How Do I Extract Data From Multiple Workbooks Using VBA

Oct 29, 2009

I am trying to create functions in VBA and I need to extract data from multiple workbooks. For example, is it possible to sum data(numbers) contained in multiple workbooks using VBA? If so, how do I create that function in VBA.

View 9 Replies View Related

Extract Data By Multiple Criteria

Jun 20, 2007

I have an excel sheet which has 200 fields and 1000 rows, now I want to make summary of them, so I need some fields to be extracted from those 200 fields to another sheet on multiple criteria, Like Category, First Name, Last Name, District, Village, Date and etc.

View 9 Replies View Related

Extract Data From Multiple Closed Files

Jul 28, 2014

The below article explains exactly what I am trying to do but the formula in step 5 doesn't seem to work. I keep getting an #REF! Error.

[URL].....

I am not sure if maybe I'm typing in the quotations wrong or if the formula doesn't actually work.

View 2 Replies View Related

Macro To Extract Data From Multiple Worksheets

Mar 15, 2003

I have a spreadsheet containing a factory's operational data, with each machine in the factory being represented by its own worksheet.

The sheets all have the same structure, with each line of data representing a shift (we have 12-hour continental shifts, so column A of all the pages has the date in an standard format, and column B has either "d" or "n", representing the shift). Various datat is documented on each machine on a shift-per-shift basis.

What I need to do is figure out how to do a macro that extracts all of the lines on all of the machines' worksheets that pertain to a particular shift (for instance, all of the lines where column A read "14-Mar" and column B read "d"), and export the values of the entire row to another worksheet, creating a shift summary on one page.

To do this, I would like to make the date and shift user-definable variables that appear at the top of what would become the summary sheet, and have a button that activated such a macro at the top of the page as well.

View 9 Replies View Related

Extract Data From Multiple Workbooks Into One Worksheet

Apr 15, 2008

I have a folder with an unlimited number of Excel Workbooks. Data within workbooks are in same format - 3 columns of data. I would like to extract the Data in the range (B55:B70) for every workbook, transpose the data and append by rows into one worksheet.

To be clear - I want to take data range B55:B70 from first workbook,transpose and put on first row - take data range from second workbook, transpose and put on second row, repeating for unlimited number of times...

View 8 Replies View Related

How To Extract Data From Multiple Files Into New Sheet Template

Jun 15, 2014

I have .Raw data in 3 different configurations, which can be opened in Excel.

I want to automatically extract relevant data (Columns) from these 3 different types of .Raw data before running analysis using chart using Macros.

Now here is the problem, Data from the .Rawdata needs to be accumulated. That is, I have multiple sheets of excel, which I have to open manually and extract specific data from individual columns onto another sheet to accumulate every data before running analysis.

How to tackle this situation?

1. Able to detect the right type .Raw data for use in Excel.
2. Extract data from many excel onto one main sheet, using Macros.

View 1 Replies View Related

Data Extract With Macro On Multiple Repeated Values

Jun 25, 2014

I am finding it very difficult to extract the Project reference data for each employee, I have attached sample working file for reference.

For Example

I have a project names in Rows and Employee names in Columns and each employee fill the working efforts in multiple projects and i would like to extract which all project they have worked for each month. Since the data is very huge i am not able to progress fast in collecting the data

Project NameEmp1Emp2Emp3
A
B 1015
C
D 2012010

Working.xlsx‎

View 5 Replies View Related

Extract AndParse Out Specific Data From Multiple Text Files

Oct 3, 2008

I have a few hundred data/text files to analyze, some a few thousand lines deep. I would like to grab 5, just 5 numbers describing voltage levels. I know the preceding text for each of these in the cell and the following text as well. I just need to delete everything else and keep these 5 values in a column using a script or a macro, and do so for all these files in a specified folder.

This would be 3 weeks of work and the analysis needs to be done ASAP for my research.

Thousands of lines of ancillary data
Thousands of lines of ancillary data

Thousands of lines of ancillary data

Thousands of lines of ancillary data

"11/09/07 14:42:20 J13-50 and J6-9, PCU Resistance (XXXXXXX. Ohms) is within 1.000 to 3741."
Thousands of lines of ancillary data...........................

View 9 Replies View Related

Grabbing Data With Multiple Criteria Across Multiple Sheets

Jun 24, 2014

I've attached a sample sheet to this message.

What I'm trying to do is grab data from the raw data sheet and paste it into the master sheet based off of certain criteria. I want to list any accounts that are not correct.

For example, I want to look through the Raw Data sheet, find the account that contains campaigns which are not correct, and then list the name of the account on the Master sheet. I only need the account name listed once on the Master sheet.

Sample Data.xlsx‎

View 4 Replies View Related

VBA Code Error - Extract Data From Multiple Workbooks To Single Excel Spreadsheet

Mar 28, 2014

I have a folder with multiples excel sheets

Destination : C: Project CustomerExcel

I would like to extract and compile the information contained in these cells:
a5,c5,a6,c6,c7,a14,g14,e16,g16,e18,i18,a20,g20,h22,j22,h24,l24 all the sheets.

New sheet would contain the information of each sheet eg. Column A2= file name

And Row B2 to R2 or whatever will be the corresponding cells mentioned above for each cell. The code I have only brings back the file name but only a5 from the range but not the rest.

VB:
Sub MergeAllWorkbooks()
Dim SummarySheet As Worksheet
Dim FolderPath As String
Dim NRow As Long
Dim FileName As String
Dim WorkBk As Workbook
Dim SourceRange As Range

[Code] .....

View 5 Replies View Related

Macro Or Userform For Extract Data From Multiple Workbooks By Giving Date Range

Apr 2, 2014

I jst need to console data from different workbooks to one worksheet. There are 30 workbooks & each workbook contains one worksheet name as Data. The work i am currently doing mentioned below step wise

1) Open workbook
2) Apply filter on whole data
3) Select dates from "J" Column (E.g 02/10/2014 to 02/20/2014)
4) Then Copy whole filtered data
5)Paste into New workbook
6) Open another worbook
7) repeate Step # 2,3
8)Then paste whole data in below the first data New Workbook (In which we have paste the first data below that i will paste this data)

These steps i have to do manually it takes almost 1hr daily After pasting all 30 workbooks data in one workbook i have to make pivot of it & sent it to my Manager. What i need

I jst want a excel macro that will ask me date range from which i have to pull data from all 30 workbooks.

Once i gave date range will jst click on button say extract or pull. It willl console whole 30 workbooks data from the given date range in a one worksheet.

View 13 Replies View Related

Formula / Function To Collect Data From Multiple Sheets And Store Data In One Sheet?

Dec 17, 2013

- I have total of 13 sheets in a workbook - 12 sheets represent 12 months with data; 13th sheet is single sheet in which i would like to get complete overview of 12 months

- each of 12 sheets has actually sales results for multiple products with following data: internal code, manufacturer part number, name, and qty sold in that month

- situation is that some products have been phased out during the year and some were introduced so each sheet is slightly different in terms of in which row certain product is located

What i would like to achive is to make 13th sheet (whole year overview) do the following:
- there is a list of all the products in it, each product has unique internal code - this code (from each line) should be used to find that code in each monthly sheet, then find its monthly sales value (copy it) and paste it in sheet 13 in cell that represents this product and particular month.

In other words i would like to see for each product what was monthly sales throughout this year, but avoid manually filling in qty for each product per month.

View 2 Replies View Related

Sum Data From Multiple Sheets

Feb 12, 2010

I have workbook with 12 worksheets (sample show only Jan and Feb sheets) from which I want to summary data onto a single Summary (see tab on worksheet) sheet. Each worksheet has three sections: Income, Expense, and Spending. From each of these sections I want to summarize data from columns: Description, Amount and Date.

For example, from Income section of all worksheets, I want Excel to look at the Descriptions column and total the Amounts for all items with the same description, that fall between two dates. Then Excel look at Expense section Description column and total the Amounts for all items with the same description, that fall between two dates. Then do the same for the Spending section.

The descriptions who's Amounts to be totaled cannot pre-exist on the summary sheet, so I need Excel to fine each unique description, list it once on summary sheet, then calculate the total. Ive attached a sample file. The SUMMAY EXAMPLE sheet is what I would like the result to look like on SUMMARY sheet, but Im open to a different layout.

View 4 Replies View Related

Add New Row After Last Row With Data On Multiple Sheets

Jul 16, 2014

I have an excel sheet with multiple tabs (Master, Sheet2, Sheet3, etc.). The Master sheet has a list of all current employee names in Column A and I want to add a Button to the sheet that will produce a message box to add a new name to the end of this list and after the last row of data on each subsequent tab (Sheet2, Sheet3, etc.). The problem I'm encountering is that the code I have requires me to select a cell and is just inserting a new row with the data on each sheet at the same point, so if I have row 14 selected the new entry is created at row 14 on each tab...

View 8 Replies View Related

Pull Data From Multiple Sheets

Jun 4, 2014

I'm working on a sheet trying to keep track on which client is working with which employee. The first sheet shows tracking for the year and each additional sheet is the month. Basically the Yearly sheet is there so I can quickly control+f "client name" and see which employee he or she is working with.

I attached a simple version of the workbook but basically it basically looks like this: Yearly sheet - Row 1 is the employees name, Row 2 is the month, and the rows after that are the clients name until it gets to the next month. January sheet - cell A1 says client, Cell B1 says employee. I'm inputing the clients in column A and the employee in column B and using this formula for the Yearly sheet (starting in row 3) =IF(January!$B2=Yearly!A$1,January!$A2,"")

This is working for what it's supposed to do, but it's not pretty and leaves a lot of of blank cells. Is there a simpler way of doing this?

YearlyClientsEmployees.xlsx

View 4 Replies View Related

Summarising Data From Multiple Sheets

Apr 21, 2009

I have a to do list on excel which spans 5 separate sheets (all within one file). I have given each item a priorty number e.g. 1, 2 or 3. I wanted to summarise on the first sheet how many priority 1s, 2s, 3s I have.

View 2 Replies View Related

Macro For Data In Multiple Sheets?

Mar 21, 2014

I want to consolidate the various employees' salaries of all months in a sheet. I enter salaries in different sheets month-wise and in each sheet, department-wise. Some employees get commission in various departments. Now, I need to see the details of an employee by giving his name. I should get month-wise his salary, commission and department in which he get commission, across all the sheets.

View 1 Replies View Related

Copy Data From Multiple Sheets

Aug 26, 2009

I am using the following code to copy data from multiple tabs to a summary tab - it is only supposed to copy the data in the rows if the cells in Column A have data in them, its working, but for some reason it is copying the data in columns Y and Z for four extra rows even though there is no data in column A for those rows.

View 5 Replies View Related

Userform Data To Multiple Sheets

Nov 17, 2009

I have created this with text, command & list boxes with a view to creating an asset register.

So the options i have are premises, hardware, software & fixtures. I have tested so that these go onto 1 sheet ( at the moment all additions go to premises) but i require for it to go to there respective sheets i.e. a sheet for each asset.

But, due to inexperience with userforms and VB i don't know how to do this.

Also, how can i get a sequential number coming up for each asset on their respective sheets

View 2 Replies View Related

Multiple Sheets Data To Table

Aug 4, 2012

I have the following (same fields) data in multiple sheets (named P1, P2 etc).

Would like to get the result as a table, based on the sheet name and the cell reference in that sheet.

P1 (Sheet Name)
row A B C
1
2
3
4 Data1 x
5 Data2 y
6 Data3 z

P2 (Sheet Name)
row A B C
1
2
3
4 Data1 a
5 Data2 b
6 Data3 c

New Sheet (Intended format of the result, based on the A3, A4 and B1, B2, B3 values)

row A B C D
1 Field Position B4 B5 B6
2 Sheet Name Data1 Data2 Data3
3 P1 x y z
4 P2 a b c

View 3 Replies View Related

Copying Data From Multiple Sheets?

Dec 1, 2012

Im looking for a way to copy all rows with data in them from row 3 to the last row with data to another worksheet. I would like to copy the data from ALL worksheets in the workbook apart from one called Grade Boundaries.

All the sheets have the same layout. I simply want to produce a sheet with the data from all sheets in one place.

View 1 Replies View Related

Sum Data From Multiple Sheets Using VLookup?

Jan 5, 2014

I have a excel doc we use at work to create a schedule for our technicians.

Each sheet is a week, so the sheet names are Week 2, Week 3, Week 4.
Each technician number is listed in column B (3,4,5,36,53,91, etc)
Row 5 has Mon-Sun
The techs work schedule is in the appropriate cell. (8 to 5, 10 to 7, Vacation, etc)

I want to count the number of shifts for each tech each week, with a running total for the year. It was easy to do it on each sheet with a simple countif formula. But The problem comes when I want to count them for the whole year.

I tried creating a "stats" sheet and make vlookup formulas to call the data from each weekly sheet. But with all the techs and shift types I want to count, it was like 40,000 cells. Excel wasn't able to calculate it, it had the "processing 0%" in the taskbar.

I thought I could use =sum(Week1:Week52!AZ6:BN50), which is where I have the counts from each weekly sheet. But my data is not always in the same spot on the sheet. Because of techs coming and going (new hires, people quit).

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved