I need a formula that uses the following premise:
If the number appearing in column B match's any of the numbers in column a Yes, otherwise No,
My best guess was this:
=IF(B1=A1:A500, "Yes", "No")
This isn't working.
I have a few spreadsheets with a few land transactions. I want to see if the parties involved are male or female, or both (in case of joint titles). And how many. I've tried to use ISNUMBER formulas and COUNTIF formulas but I can't seem to make them work. I've attached an example of what I need to do, the original has many more column with more info, and the names are in a different language which makes it easier to identify as female or not (like 'phany' in english female names etc).
View 8 Replies View RelatedI'd like to count the number of occurrences a value appears in a column. Hard to explain what I'm after so I will draw it out:
Column A
2512
2512
2513
2513
2513
2513
2518
2519
2519
2519
I want to add a formula in column b that will add the number of times it appears as it appears:
ColA ColB
2512 1
2512 2
2513 1
2513 2
2513 3
2513 4
2518 1
2519 1
2519 2
2519 3
Right now, I'm trying to find a way to count the number of times a certain phrase appears in a column.
I'm currently using this formula for exact values: COUNTIF(A1:A5,"Hello"), but this only works if an entry in a column is exactly: "Hello"
I want to be able to count a column even if it has more words, such as "Hello how are you" etc., and this column would be counted because it has the word "hello" in it.
Im trying to construct a nested Countif statement. I need to count the number of instances that "Project" appears in Column O AND "TS" in Column N. The range is in another in Sheet2. and the summary in Sheet 1 where I want to have the Countif(AND...??? statement Example Counif(Sheet 1 Column 0 contains "Project" AND if Column N Contains "TS"
View 2 Replies View RelatedI type random numbers into column B
I want cell E10 to read column B then display (number 26 for example) how many times number 26 appears in column B
I am trying to create a graph that is conditional on two different columns. The first column is a date column, the second column has various categories. I want to show how many times each category appears per month. This database is continually added to so I wanted the formula to reflect the entire column range.
For example, let say I have 5 categories (Grapes, Apples, Peach, Pear, Banana). Column A would show a date (in a M/D/Y format) and Column B would list the fruit type. I want to show how many Grapes were input in January, February, March, etc. and then move on to show how many apples in each month, and so on.
I need to populate sheet 1 of the spreadsheet attached.
I have tried several formula's but don't work and am getting desperate!
I need to count Column A of sheet2, when "Adverse SEN" occurs but only when there is an "x" in Column B of sheet 2 appears next to "Adverse SEN".
So basically i need to populate Sheet1 of the spreadsheet with the data is sheet2 of the spreadsheet.
I need a formula to calculate how many time an adverse SEN was - where there is an x - resubmitted, approved at meeting, delegate approval obtained, approval outstanding, rejected or approval not required.
I am using excel 2003, so please don't provide me countif functions.
I need a formula to find the latest date (Column A) a given value appears in Column B.
Column A is a list of dates.
Column B can contain any of 6 values (For example: A, B, C, D, E, F).
And, to make it even more fun, the system I'm working on doesn't allow macros.
I want to see if a value in column A appears in any of the cells in Column B and to give the answer in column C.
I am trying to match postcodes, so I want to see if a postcode in a cell in column A appears in column B. I am aware the IF function will see if it appears in the cell in the ajoining row but I need to select the whole column dataset.
I'm putting together some data for a pivot table.
In Column Q I have a list of products. In column E these products are listed a number of time (depends on the number of regions which may change). What I am looking to do is have column A show "1" the first time the item group is in the list, "2" the second time...up to 12. Basically I'm looking to have a month (#1-12) appear in column A next to the item. If there are 3 regions then then each item will appear in the column E list 3 times. I'd like each group of 3 items to have a "1" the first time they appear, "2" the second...etc.
Here's an example....
1 - Item#1
1 - Item#1
1 - Item#1
1 - Item#2
1 - Item#2
1 - Item#2
2 - Item#1
2 - Item#1
2 - Item#1
2 - Item#2
2 - Item#2
2 - Item#2
3 - Item#1
3 - Item#1
3 - Item#1
3 - Item#2
3 - Item#2
3 - Item#2
When I hide a column in this spreadsheet, text appears in some of the cells that shouldn't be there. When I highlight and try to delete, it won't delete and it doesn't even show up in the function bar. I was able to get it to delete when I do clear, all from the edit menu but as soon as I try formating the cell, it puts it right back. Same text, same formatting. I can't get rid of it.
View 10 Replies View RelatedThe formula I'm trying to use is
=IFERROR(INDEX(L31:L6621,MODE(MATCH(L31:L6621,L31:L6621,0)+{0,0})),"")
And it works as I need it to returning the value that appears the most from L31 to L6621. My problem is the number of rows will continue to change. So I tried something like this
Sub ARBM()
Dim lr
With ActiveSheet
[Code].....
But I get a compile error with expected end of statement. How else can I write this?
I was wondering if it is possible to delete rows if a value appears only 1 time in a column? To clarify since 123 only appears once in column A I want the entire row 4 deleted.
View 2 Replies View RelatedIf I have columns A-F and the 1st time a number appears in that row I want to know the column number, so if the first time a number appears in column 'C' I want it to return 3.
View 9 Replies View RelatedI have a two ranges of columns containing names. I need to count how many times a specific name appears in ColumnN - Easy enough =COUNTIF(N$2:N$1047,Q3) ...Q3 being the name I am looking for.
Now comes the part I am stuck on. I need to count how many times a name appears in ColumnK but only if there is no name in ColumnN.
I tried =IF(COUNTIF(N3:N1047,""),COUNTIF(K2:K1047,T3),)
I want to count how many times a particular text appears in Column A depending on the number times another text appears in Column B.
Say for example if I have in Column A {A, B, C, D}nd column B I have {AA,BB,CC) and if I want to check how many times column A has "A" value when the column B has "CC" value, then how should I proceed with this ?
Is there a macro to delete an entire row if a duplicate entry appears only in a certain column.
1. Look for the column header with the name "File Number"
2. Anytime the same number under the "File Number" column appears more than once in that column, keep the row that contains first occurrence of that number buy delete the entire row anytime that number is repeated in another row in that same column.
This is regardless of what is contained in the other columns. For example..let's say these cells contained this data...
B1 - UTE00225
B2 - UTE00546
B3 - UTE65513
B4 - UTE00225
B5 - UTE00225
In this case, I would want to keep rows 1, 2, and 3. But, I would want to delete rows 4 & 5 because the number "UTE00225" has already appeared first in B1. I'm using Excel 2003.
I have a single work book with 8 sheets (I am using Excel 2010 BTW) and I am trying to find a total of times a word appears across all the sheets in column "C"
I found this formula on another thread. =SUM(COUNTIF(INDIRECT("Sheet"&{1,2,3}&"!C1:C1000"),"="&H3)) with an example. I made the changes that I needed for my purposes
This worked but only after I renamed the sheets to Sheet1, Sheet2, etc.
Is there a way get the same results from the above formula if all the sheets are named after our reps? Example: sheet1 is named Dan, Sheet2 is Nick, etc?
Frequency
Formula to show the final/total a numeric values appears in an adjacent column.
I am currently attempting (I've researched many posts on this), to count /show the final totals a duplicate numeric value appears in one column, in an adjacent column (example below).
I am currently using an array Frequency formula below (courtesy of the board) filled down in column Q. this works well to count the frequency of duplicate numeric values appear on the list.
Formula used in Column Q below
{=IF(C2>=0.1,MAX(FREQUENCY(IF(C2:$C$1000=C2,ROW(C4:$C$1000)),IF(C2:$C$1000C4,ROW(C2:$C$1000),""))))}
However my aim is also to show the final entry of a numeric value in adjacent column R, by displaying text to indicate this. My example below shows “final” in column R
NB: My list is sorted by column C to ensure all numeric values are in ascending order.
Example
Column C Column QColumn R
12567 1 final
15789 1
15789 2
15789 3 final
23456 1
23456 2 final
12678 1 final
18965 1
18965 2 final
when the largest number in column B the hotel in column A should be in bold.
So in excel language IF(Number in B Is Max display corresponding hotel in column A as BOLD. But I can't figure out how to do this.
You can see here on the image:
additionalimage.gif
I'm trying to write a code that calculates 2nd column based on 3rd column's number or vice versa based on the condition set on the 1st column. Below, there are two procedures. "SimpleCalc" and "SimpleCalc2". I first wrote SimpleCalc2, but it isn't working, so I worked around the error by writing SimpleCalc, which selects a cell and moves around by offset. I personally find it hard to read and error prone as I develop more logic around it.
I'm trying to develop more function based on this code, so I need to make it neat and flexible. what I'm doing wrong in SimpleCalc2? Or do you have any suggestion to improve the code "SimpleCalc"? I'm using Excel 2003.
Sub SimpleCalc()
Dim SimpleMethodRng, SimpleMethod As String, i As Integer
ActiveWorkbook.Worksheets("Dashboard").Range("P5").Select
SimpleMethodRng = ActiveWorkbook.Worksheets("Dashboard").Range("N5:P12")
For i = 1 To 8
SimpleMethod = SimpleMethodRng(i, 1).........
I have a spreadsheet with sales which I colour green when they are outstanding and red when they are despatched. I would like to automatically add a 1 in an adjoining column when the cell is green (eg outstanding) or zero when they are despatched so that it totals up the number of outstanding orders.
a b
172.95 (this column would be green)
024.00 (this cell would be red)
124.00 (this cell would be green)
132.25 (this cell would be green)
I work in a factory where we create different types of units daily. Below is a list of planned production on a specific date, say today's date. This is a very crude example, with information missing, and it is important to know that there are conditions attached such as:
The types are added randomly. The amount of types is much greater meaning that each type is on it's own page with breaks between. Everything produced on this date will have a URN (unique reference number) with its first 6 digits equating to yy-mm-dd and the last two being the position of the unit in the production sequence (first=01, second=02 etc).
I have gotten it to the point where if you enter them in sequence (Type A first for example) it will lookup to see the last assigned URN and taking the quantity into account issue the correct URNs.
The issues I have are when the URNs are less than "10", there is a problem displaying the 0 before the digit which disrupts the sequence. I can provide more clear examples if required.
Type A
Date08/04/2014
QtyURN
101314040801-03
203514040804-08
462114040809
123914040810-19
Total18
Type B
Date08/04/2014
QtyURN
245114040820
290114040821
689114040822
Total3
Type C
Date08/04/2014
QtyURN
1111414040823-36
211214040821-22
675514040823-27
Total21
I am creating a tool that is populating information off of another excel document and presenting the information in a different format then the data originally appears. Basically I am unsure how to create a formula, for example, in cell A1, that as I drag it down (A2, A3, etc) the column letter in the formula advances but the row number remains the same. In another words as the formula moves into cell A2, the "Sheet1!D3" changes to "Sheet1!E3", where as normally it would advance to "Sheet1!D4". I just started back up in excel, im sure this is way easier then I am making it seem but I have been unable to come up with a solution.
View 4 Replies View RelatedI have the following sample data set and I'm trying to return the appropriate column header based on criteria (i.e. DDD) and a number value which will be somewhere within the range of the table. In example below, the value returned should be Header 2 because the value is greater than those in Header 1 column (range H9 to L26).
Here's data table:
CriteriaHeader 1Header 2Header 3Header 4
ZZZ5.0015.0050.00130.00
ZZ5.0015.0050.00130.00
Z5.0015.0050.00130.00
YYY5.0015.0050.00130.00
YY5.0015.0050.00130.00
Y5.0015.0050.00130.00
DDD5.0015.0050.00130.00
DD5.0015.0025.0075.00
D5.0015.0020.0065.00
RRR5.0015.0015.0045.00
RR2.5010.0010.0030.00
R1.503.0010.0025.00
UUU0.751.505.0020.00
UU0.751.505.0020.00
U0.751.505.0020.00
P0.751.505.0020.00
T0.100.105.0018.00
CriteriaNumberValue
DDD10.00Header 1>>>=INDEX($I$9:$L$9,MATCH(I29,INDEX($I$10:$L$26,MATCH(H29,$H$10:$H$26),)))
I'm creating a macro that creates a co-ocurrence matrix from variables that are adjacent to each other.
In order to proceed, I need to know how to return the column number of the first (leftmost) column in a range that the user selects.
I was wondering, is there a function that would take, lets say, every 4th cell value from a column and create another column consisting of every 4th number ?
View 2 Replies View RelatedI need formatting to highlight the dates in Column H if they are a greater than a week or more from Column G. Tried some different ways of doing this with the conditional formatting but cannot get it to work yet
View 12 Replies View RelatedI am trying to get the number of records/samples in column C between two dates in column A.
View 9 Replies View Related